Rear Roller - Commercial Products - Hayter


	accessibility Home Why Hayter? Our Products Warranty Registration News Helpful Advice Contact Us Dealer Site Home » Commercial Products » Rear Roller Use our Product Finder below to help find your most suitable product. What type of mower are you looking for? What type of lawn / grass area do you want to cut? What type of cutting action do you require? What type of fuel do you want to use? Do you require fixed or floating cutting units? How many cutting units do you require? Start again Glossary What type of mower are you looking for? Walk Behind Rear Roller Operated by holding the handlebars and walking behind the mower. It can be either pushed by the operator or power driven. The rear roller at the back of the mower leaves a striped finish on the lawn Walk Behind Four Wheels Operated by holding the handlebars and walking behind the mower. It can be either pushed by the operator or power driven Walk Behind Hover Floats on a cushion of air with no wheels or rear roller. Does not collect grass clippings Walk Behind Wide Area Large commercial power driven walk behind machine with a cutting width greater than 24" (60cms) Ride-On Cylinder High performance ride on machine fitted with multiple cylinder cutting units Ride-On Rotary High performance ride on machine fitted with a single or multiple rotary cutting decks Trailed Cylinder Tractor drawn PTO (Power Take Off) driven trailed machine with multiple cylinder cutting units What type of lawn/grass area do you want to cut? Striped Lawn Striped finish achieved by rolling the grass in different directions as you mow up and down the lawn Fine and Informal Lawn Fine Lawn: Good quality lawn, often with a striped finish regularly maintained Informal Lawn: General purpose lawn with or without a striped finish Sports Facilities Flat open areas with few obstructions, for example playing fields, football pitches, recreation grounds Road Side Maintenance Road side verges and grassed area near to public highways often with obstacles such as road signs and trees Amenity / Housing Grassed areas predominately around housing estates, small parks and industrial/commercial sites Large Amenity / Parkland Large open grassed areas often of several acres in size with few or no obstructions What type of cutting action do you require? Cylinder Rotating multi-bladed cylinder that cuts grass against a fixed blade using a scissor type action. The lower the number of blades on the cylinder the better it is able to cope with taller, thicker grass. As the number of blades increases the quality of cut improves but the ability to cope with taller, thicker grass diminishes Rotary Typically this is a single piece blade that is sharpened at both ends. It rotates in a horizontal plane about a vertical shaft and relies on the speed of the blade to cut the grass. Rotary blades cope well with a wide variety of grass conditions from formal lawns to long grassed areas What type of fuel do you want to use? Petrol Mower is powered by a conventional 4-cycle petrol engine running on unleaded fuel Diesel Mower is powered by a conventional diesel engine with fuel injection LPG Mower is powered by a petrol engine specifically configured to run on LPG (Liquid Petroleum Gas) Do you require fixed or floating cutting units? Fixed The cutting unit is able to pivot about its mounting point in a lateral direction. This configuration is ideal for the majority of grass cutting applications including parks, amenity areas, road side verges and sports fields Floating The cutting unit is able to pivot about its mounting point both in a lateral and a fore & aft direction. This enables it to follow ground contours closely and ensure a high quality finish at low cutting heights How many cutting units do you require? 1, 3, 5, 7 Machines are fitted with a different number of cutting units depending on their type, size and overall cutting width Number of heads 1, 3, 5, 7 Number of Heads 1, 3, 5 or 7 number of heads of either rotary or cylinder fitted to the machine Fuel type Petrol Mower is powered by a conventional 4-cycle petrol engine running on unleaded fuel Diesel Mower is powered by a conventional diesel engine with fuel injection LPG Mower is powered by a petrol engine specifically configured to run on LPG (Liquid Petroleum Gas) Head configuration Fixed The cutting unit is able to pivot about its mounting point in a lateral direction. This configuration is ideal for the majority of grass cutting applications including parks, amenity areas, road side verges and sports fields Floating The cutting unit is able to pivot about its mounting point both in a lateral and a fore & aft direction. This enables it to follow ground contours closely and ensure a high quality finish at low cutting heights Enter keywords to search products. Rear Roller The rear roller range allows the machine to give the classic striped finish with the ability to cut over the lawn edge. Harrier 48 Pro Autodrive Ideal for the professional gardener and landscaper. A robust mower designed to enable you to tackle all areas of the garden. Product Details Harrier 56 Pro Autodrive The professional gardener and landscaper need look no further for a powerful machine designed to lighten a heavy workload. Product Details Harrier 56 Autodrive VS This is the largest walk behind rear roller rotary mower in the range with an impressive 56cm (22") cutting width. Product Details Harrier 56 Autodrive ES VS This mower comes with all the features of the Harrier 56 Autodrive, Variable Speed with the added benefit of key-start ignition. Product Details Harrier 56 BBC Autodrive VS A powerful, self-propelled machine featuring a Blade Brake Clutch allowing you to stop the cutterblade whilst the engine is still running. Product Details Locate a Dealer Locate your Authorised Sales, Service or Parts Dealer Request a Brochure To help you select the correct Hayter product let us send you our latest brochure Search Manuals Search and download operator manuals Sitemap Copyright Privacy Terms and Conditions